I also sometimes ignore existing drivers and create my own. You’re not using the driver for the instrument. Look for the appropriate SCPI-commands in your manual. Message 1 of You have to put together the building blocks to get your measurement.
|Date Added:||15 August 2011|
|File Size:||52.96 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
Right after that you read the answer from your instrument with the GPIB First I might suggest to write in german as that might be easier for you?
Gpi followed your gpiib with Joe With the above named VI you first send kind of an initialization to the instrument: Of course you can add some kind of control of the communication if you want.
Message 2 of Of course you can also communicate with your power supply like this. Message 5 of The driver only uses the Fetch and Read commands so I can’t confirm that the Measure command is correct.
How can i do with these? Install the driver and follow the steps in my original answer. In this way you can communicate with every GPIB-instrument easily without the absolut need of an instrument driver.
A GPIB VISA TIME OUT ERRORS | Keysight Community
The same as the structure in Attachments. Message 9 of See attached picture for additional functions: Gpiib for your help.
Here is a link for the driver: Message 10 of Now I have the neu Problem.
Now I can do this. You can now ask the instrument for the currently measured data i.
Message 8 of You’ll get there quickly. You’re not using the driver for the instrument.
34401A GPIB VISA TIME OUT ERRORS
Message 7 of Most Active Software Boards: This could become a lengthy explanation You can find all necessary SCPI-commands there and you can just send them to the instrument by using the above mentioned VI. Before you finish your program you should return your instrument from the remote state in the local state.
Message 6 of So try the following: They are embedded inside the instrument driver selections. Message 4 of First thing is to obtain the LV drivers for the A. I also sometimes ignore existing drivers and create my own. Look for the appropriate SCPI-commands in your manual.